How do manufacturers typically start when everything can’t change at once?

Most begin by focusing on one or two areas where variability causes the most disruption, such as scheduling instability or quality holds. Improving control in these areas builds confidence and creates momentum for broader progress over time.

How do these technologies coexist with existing equipment and long-lived assets?

Rather than replacing equipment, manufacturers often extend the value of existing assets by connecting them more effectively. This allows operations to modernize gradually without writing off years of capital investment.

What kinds of organizational changes are usually required to see real value?

Change is usually operational rather than structural. Clear ownership, well-defined workflows, and shared performance measures help teams understand how information supports better day-to-day decisions.

How do manufacturers balance innovation with risk and operational stability?

Innovation works best when introduced in controlled steps. Clear boundaries, approval processes, and gradual scaling help manufacturers improve responsiveness while maintaining reliability.

How does this approach support long-term competitiveness, not just efficiency?

Better-connected operations make it easier to adapt to changing demand, regulations, and product mixes. Over time, this flexibility supports sustained competitiveness rather than one-time efficiency gains.

Manufacturing technology: Today and tomorrow

Manufacturing technology brings connected data, automation, and intelligent systems into everyday production – so teams can run with more visibility, steadier control, and the ability to adapt and pivot no matter what the future brings.

Infor_3D Platform Image_Library_Dark_06.jpg

Cloud-connected manufacturing technology started out as an emerging trend and has quickly become a practical necessity. Markets shift faster than ever before. Demand is more fragmented and erratic. Supply and labor disruptions are harder to predict. Issues around compliance have also escalated with regulators expecting more documentation in less time. Today’s smart manufacturing technologies have evolved in response to all this pressure. They connect machines, systems, data, and people in a way that keeps work visible and decisions grounded in reality. That visibility not only helps teams respond earlier when something drifts off course – it also builds a stronger foundation for tomorrow, where adaptability and steady control matter just as much as efficiency.

What is manufacturing technology?

“Manufacturing technology” doesn’t refer to a single system or breakthrough but describes how a range of modern technologies are applied together – to improve how manufacturing actually runs day to day.

Dimension	Description
What is it?	A set of digital, automated, and intelligent technologies used to support modern manufacturing operations
What does it connect?	Machines, systems, data, and people across production, quality, maintenance, inventory, and planning
How does it operate?	Through shared data, automation, and analytics that work across workflows rather than isolated processes
What does it deliver?	Earlier insight, faster adjustments, and more consistent execution as conditions change
How is value created?	By improving visibility, reducing variability, and supporting better decisions at the moment they’re needed

Why are smart manufacturing technologies so essential?

Gone is the luxury of long product lifecycles and stable, fixed markets. Today’s manufacturers can’t afford slow feedback loops and unresponsive operations. When a schedule changes mid-run, materials arrive late, or a line underperforms, you need answers fast enough to still influence the outcome – not explain it after the fact.

Connected quality and traceability

By connecting quality signals to production (in real time), teams can intervene earlier – containing issues with precision before it’s too late. This way, problems are surfaced before a run is finished, isolating affected lots sooner and preventing defects from cascading across batches or orders.

Real-time production visibility

A smart environment gives teams a unified view of machine status, material flow, quality checks, and output as work progresses. When data and visibility are shared, surprises are reduced – and decisions get faster and more confident because everyone is responding to the same live picture of reality.

Automated data capture

Smart manufacturing reduces error-prone manual updates, after-the-fact reporting, and “somebody told me” handoffs. Data is captured where work happens and is immediately usable – so operators, supervisors, and support teams aren’t spending precious time trying to figure out what’s true or not.

Coordinated actions across teams

Integrated, unified systems prevent important data from hiding in silos and teams from operating in isolation. Cloud connectivity keeps plans aligned so when a slowdown or shortfall occurs, production, maintenance, and inventory teams can all act with coordinated awareness.

Adaptability in daily production

Smart factories are built to flex without breaking or losing control. AI-powered solutions can automate tasks and guide teams to re-sequence work, adjust routing, or change priorities when conditions shift – while still keeping track of what’s running, what’s waiting, and what needs to happen next.

Trust and accountability

When systems are reliable and information is consistent, teams spend less time debating whose numbers are right and more time taking responsibility for outcomes. Clear accountability supports steadier execution, faster issue resolution, and a culture of trust and confidence.

Loading component...

10 manufacturing technology examples

The capacity of manufacturing technologies has evolved at an amazing pace over the past couple of decades. These examples represent some of today’s typical industry use cases:

3D printing in manufacturing

3D printing (also called additive manufacturing) produces parts by building them layer by layer from a digital model, rather than machining them from solid material. It is commonly used for prototyping, tooling, fixtures, and low-volume or highly specialized components. 3D printing excels where speed, customization, or design iteration matters.

EXAMPLE: AEROSPACE AND DEFENSE
A&D manufacturers produce custom tooling and assembly fixtures for complex structures. Using 3D printing, these tools and fixtures can be updated quickly as designs evolve. This helps teams validate fit and process changes without waiting for long machining lead times – and while maintaining revision control and traceability.

The Internet of Things (IoT) in manufacturing

The IoT connects a network of sensors, machines, and equipment to continuously capture data from production environments. It can provide live insight into machine health, process conditions, and material flow. Connected IoT data supports smarter automation and faster responses to emerging issues.

EXAMPLE: FOOD AND BEVERAGE
F&B manufacturers use sensors to track temperatures, tank status, and cleaning cycles across pasteurization and packaging lines for dairy processing. This live data helps teams coordinate schedules, prevent contamination, and isolate affected batches quickly – protecting both compliance and shelf life.

Digital twins in manufacturing

A digital twin acts as a virtual representation of a physical asset, process, or production flow – allowing you to model scenarios and understand the impact of changes before they are applied on the shop floor. Digital twins in manufacturing are especially relevant where production is tightly coupled and disruptions are costly.

EXAMPLE: AUTOMOTIVE
Digital twins can simulate line balancing and sequencing if last-minute engineering changes affect parts availability. By testing scenarios digitally, teams can assess impacts on throughput and delivery before adjusting schedules or layouts in live production.

Robotics and automation in manufacturing

With robotics in manufacturing, programmable machines are used to perform repetitive, precise, or physically demanding tasks. Smart automation improves consistency and efficiency, reduces physical strain, and limits variability – especially in tasks where even small deviations can create downstream risks or delays.

EXAMPLE: INDUSTRIAL EQUIPMENT MANUFACTURING
Robotics make large-scale sub-assemblies possible through the use of robotic welding and material-handling systems. Automation helps stabilize throughput across high-mix production bays by standardizing repeatable work, reducing delays, and making performance more predictable and reliable.

AI in manufacturing

AI in manufacturing uses a range of tools, including machine learning, computer vision, generative AI, AI agents, and more. It supports production and quality by helping teams spot patterns, detect anomalies, and flag risks earlier than manual analysis alone. Over time, models can adapt as conditions and data change.

EXAMPLE: ELECTRONICS MANUFACTURING
In electronics manufacturing, AI-driven visual inspection can detect solder defects and component misalignment on densely populated circuit boards. Early detection reduces scrap and rework while still maintaining high yields on fast-moving production lines.

Augmented reality in manufacturing

Augmented reality (AR) overlays digital instructions or information onto a worker’s physical environment – often through specialized goggles. In manufacturing, AR supports guided work, inspection, and remote assistance, particularly where tasks are complex or procedures change frequently.

EXAMPLE: LIFE SCIENCES MANUFACTURING
Pharmaceutical manufacturers can use AR-guided instructions to support equipment setup and validation activities. Visual prompts help operators follow precise procedures with confidence and consistency – ensuring accuracy in high-stakes environments.

Cybersecurity in manufacturing

Manufacturing cybersecurity focuses on protecting connected production systems, operational data, and access pathways. As factories become more integrated and connected, cyber threats become a growing operational reality – making software and technologies a top priority for modern manufacturing.

EXAMPLE: HIGH-TECH MANUFACTURING
Cybersecurity helps secure access across globally distributed plants and suppliers to protect intellectual property and prevent unauthorized system changes. Strong controls help maintain uptime in environments where product lifecycles are short and production schedules are tightly inter-dependent.

Cloud and edge computing in manufacturing

Edge computing processes data at or near machines for instantaneous responses to shop floor events. Cloud computing then aggregates and contextualizes that data across all systems. Together, edge handles real-time control, while cloud provides shared visibility, coordination, and longer-term analysis.

EXAMPLE: CHEMICAL MANUFACTURING
On a chemical production line, edge systems adjust temperature or pressure in milliseconds to keep reactions stable and safe. That same data is sent to the cloud, to compare performance across sites, support compliance reporting, and refine production plans based on actual, live conditions.

Manufacturing execution systems (MES)

MES systems orchestrate how production plans translate into executable work – guiding operators through tasks, recording outcomes, and connecting quality, inventory, and maintenance activities to live operations. They ensure that people and machines are working from the same, current information.

EXAMPLE: METAL FABRICATION
An MES can coordinate heat treatments, rolling operations, and quality checks across long, continuous production runs. By capturing process conditions and linking them to specific lots and orders, teams can trace deviations quickly, adjust downstream operations, and avoid costly rework or scrapped material.

Industrial analytics in manufacturing

Industrial analytics reveal patterns that are difficult to see in isolation. They help manufacturers understand why performance varies, where constraints are forming, and which factors are most likely to affect outcomes – supporting investigation and improvement rather than replacing operational judgment.

EXAMPLE: FASHION AND APPAREL MANUFACTURING
Industrial analytics can assess performance across styles, lines, and factories. By comparing cycle times, defect rates, and rework patterns, they can identify where variability is eroding margins and adjust processes before seasonal deadlines are missed.

Loading component...

AI agents in manufacturing

An AI agent is an integrated software-based assistant that monitors activity across connected systems, recognizes patterns, and helps coordinate responses when conditions warrant. In manufacturing, agents don’t operate independently or make unsupervised decisions. They work within human-defined boundaries to put together context, provide options, and support teams as situations unfold.

As smart manufacturing and factory environments become more connected, this kind of assistance makes more and more sense. AI agents in manufacturing can act with amazing speed and accuracy to keep things on target, even if schedules slip, constraints emerge, or priorities shift. They pull together relevant information across production, quality, maintenance, and materials. And while agents support faster, more informed responses, they’re also built to remain firmly under human review. Especially around issues affecting quality, safety, cost, or delivery.

How do manufacturing technologies work together?

On their own, modern technologies are amazing and powerful – and much like the eyes, ears, or hands of the human body, each plays a vital and specific role. But it’s only when those senses and actions are coordinated by a central nervous system that meaningful, controlled output happens. Modern manufacturing works the same way. Real value emerges when technologies are connected and guided together, so execution, insight, and decision-making reinforce one another as conditions change.

Signals are sensed at the source

Data is captured as work happens – by operators, connected systems, and even legacy machines fitted with sensors. This creates real-time visibility across both digital and analog environments.

Context is anchored in execution

Manufacturing execution systems translate those signals into operational context – linking and aligning quality, inventory, and maintenance to the work that’s actually running.

Intelligence is applied where it helps most

Analytics and AI surface patterns, risks, and trade-offs that are hard to spot manually. This lets teams focus attention where it’s needed, without overwhelming them with noise.

Operations and actions stay aligned

Key operational areas such as planning, supply chain, and financial systems remain connected to real production status. This means adjustments can reflect reality rather than assumptions.

Humans remain at the helm

Cloud-connected systems provide insights and recommendations to inform decisions. But approval, escalation, and accountability stay with the people responsible for the outcomes.

What are some benefits of smart manufacturing technologies?

When smart manufacturing technologies are applied together, their impact extends beyond the plant floor. The benefits show up across your business, boosting reliability, efficiency, and team engagement from end to end.

Consistent quality

Connected quality data and end-to-end traceability help teams isolate and fix issues more precisely. Faster containment limits the scope of impact and lowers the risk of problems cascading. And with more consistently reliable quality standards, there is a positive impact across the business.

Predictable throughput

Last-minute disruptions are avoided with live visibility and coordinated workflows. This leads to steadier output and fewer operational surprises – which in turn, supports more accurate planning and budget-setting, and the ability to make more confident business commitments.

Less waste

Earlier intervention and tighter operational control help protect materials, equipment, and margins. By addressing variability before it turns into scrap, downtime, or excess consumption, you can improve asset performance, reduce waste, and achieve more robust sustainability goals.

Stronger business resilience

Better-connected operations help you pivot and respond as needed – absorbing disruption without losing control. With reduced exposure to supplier delays and demand swings, you can maintain steadier service levels and margins as conditions change.

Greater strategic optionality

Improvements in day-to-day execution give you more flexibility as to how you use your resources – from manufacturing assets to people. Product mixes, capacity, and compliance requirements can evolve as you scale, without overhauling the operating model or disrupting what already works.

Loading component...

Challenges and tips when adopting new manufacturing technology

New manufacturing initiatives often stall not because the technology falls short, but because businesses underestimate the realities of transforming longstanding processes. Plants are busy, risk tolerance is low, and value is expected to show up immediately in daily execution – not as a future promise. Successful efforts treat adoption as an operating change, not a technology rollout.

Integration and data consistency. Manufacturing data typically spans all your people and systems. If those signals don’t align, teams lose trust. Effective programs start by agreeing on a small set of shared definitions, validating key signals at the source, and connecting workflows where teams will feel the most immediate benefit.
Skills, training, and change management. Even the most helpful technology can stall if people don’t understand how it affects their role. Progress accelerates when teams can see tangible improvements in their day, receive training in manageable chunks, and have trusted, known peers who can help reinforce new ways of working on the floor.
Cyber risk and governance. The more devices, machines, and “things” that are connected, the greater the potential surface for cyber risk. Modern manufacturing ERPs and software are built to handle this reality. But you must also ensure clear ownership, role-based access, approval controls, and auditable decisions across all your operations.
Getting past “pilot purgatory” and scaling responsibly. Many pilots deliver insight but never become dependable enough to scale. And unfortunately, the gap is usually operational rather than technical. Ensure you test under real variability, define confidence thresholds, and roll out in controlled stages. Phased adoption builds trust and minimizes risk.

Loading component...

Conclusion

What today’s manufacturing leaders want are fewer late-night escalations, bad surprises, and last-minute judgment calls. They’d like to be finished with situations where some small issue goes unnoticed and spirals before anyone has time to react. Having an excellent team and a solid operational structure is a great place to start. But to keep up with the pace of change and disruption in today’s global landscape, digital capabilities need to be a good fit for the way work actually happens – connecting signals across the business, supporting earlier intervention, and helping teams respond with confidence before small issues become costly ones. Going forward, as operations become more connected and coordinated, change becomes less disruptive. New requirements, new products, and new constraints can be absorbed without destabilizing what already works. That is where today and tomorrow meet – building clarity now while quietly strengthening the operation for whatever comes next.

Loading component...

See how Infor’s industrial manufacturing software can help you take full advantage of the latest technologies – from the IoT to AI.

Industrial manufacturing software

Loading component...

Manufacturing technology: Today and tomorrow

Manufacturing technology

What is manufacturing technology?