What is Industry 4.0 vs. Industry 5.0?

Industry 4.0 vs. Industry 5.0 highlights the shift from connected, intelligent automation toward manufacturing models that place greater emphasis on people, resilience, and sustainability.

Infor_3D Platform Image_Library_Dark_06.jpg

What is Industry 4.0 vs. Industry 5.0?

The five Industrial Revolutions
What is Industry 4.0?
What is Industry 5.0?
Industry 4.0 vs. 5.0
Using Industry 4.0 and 5.0 together
4.0 and 5.0 in smart manufacturing
Implementing Industry 5.0
FAQs

Industry 4.0 and Industry 5.0 describe two distinct moments in the evolution of manufacturing. Industry 4.0 focuses on building digitally connected operations – using data, automation, and intelligent systems to improve visibility, coordination, and control. Industry 5.0 builds on that technical foundation but shifts the emphasis toward people, resilience, and sustainability. It asks not just how factories can run smarter, but how digital capability can better support human expertise, adapt to disruption, and align industrial progress with broader societal goals. Understanding the difference helps clarify where digital transformation is headed – and what manufacturers are being asked to deliver next.

What are the five industrial revolutions?

These historical eras in manufacturing are defined by the “revolutionary” nature of the technologies and innovations that defined them.

First Industrial Revolution: Steam

1760s to mid-1800s (at its height by 1840). Steam power evolved along with advances in steelworking and engineering. Steam provided previously unavailable amounts of mechanical energy, allowing industry to evolve and scale at an enormously accelerated pace for the time.

Second Industrial Revolution: Electrification and mass production

1870s to early 1900s (at its height by 1914). Electric power led to precise, controllable machinery and flexible factory layouts – making assembly lines practical. This supported the production of consistent, interchangeable parts and allowed work to be organized into repeatable processes that delivered high volumes at lower cost.

Third Industrial Revolution: Automation and computing

1950s to early 2000s (at its height by 2000). Electronics, programmable logic controllers (PLCs), and early computing systems brought automated control to production. Repetitive tasks, calculations, and monitoring moved from manual routines to programmable logic and digital interfaces.

Fourth Industrial Revolution (Industry 4.0): Connectivity and AI

2010s to present (currently maturing). This is the rise of the smart factory – where digital systems became connected, and machines, sensors, software, and systems began sharing data in real time. Automation and analytics grew more advanced, and factories gained the ability to forecast, sense, and respond to change.

Fifth Industrial Revolution (Industry 5.0): Human-centric, resilient

Late 2010s onward (currently emerging and maturing). A shift in focus from the technology itself to human/machine collaboration. Industry 5.0 emphasizes human judgment and decision-making, sustainability, and resilience – leveraging all the 4.0 advanced tools in ways that support people, adaptability, and long-term value.

What is Industry 4.0? Definition and meaning

Industry 4.0 describes how manufacturing operations began to function as integrated digital systems rather than isolated processes. Instead of optimizing individual machines or departments, factories started coordinating production, quality, maintenance, and supply decisions through connected data and automated control. Some of its core characteristics include:

Connected production environments

Physical operations are digitally represented through connected machines, sensors, data, and systems, allowing events on the shop floor to be reflected across planning and operational layers.

Software-driven automation

A shift from mechanical control to digital systems. Logic and workflows are executed through connected solutions that draw on things like IoT data, AI, machine learning, and RPA to coordinate processes across the factory.

Operational data as a planning input

Production, quality, and equipment data are continuously captured and used to break down silos and inform decisions beyond the factory floor, including planning, sourcing, and performance.

System-wide coordination

Instead of optimizing one function at a time, Industry 4.0 supports coordinated decisions across manufacturing, quality, maintenance, and supply operations.

Responsive operating models

With tighter feedback loops between execution and planning, manufacturers can react more quickly to variability without reworking the entire operating plan.

Loading component...

What is Industry 5.0? Definition and meaning

Industry 5.0 represents a shift in how advanced manufacturing is applied, rather than a new wave of core technologies. It reframes digitally connected operations around human judgment, environmental responsibility, and long-term resilience – using the capabilities of Industry 4.0 in more deliberate and balanced ways. Core characteristics of Industry 5.0 include:

Human-centered production models

Technology is designed to support people, not replace them. Automation handles repetitive or hazardous work, while humans focus on judgment, creativity, problem-solving, and oversight.

Purpose-driven use of technology

Digital tools are evaluated by the value they create – not just efficiency, but also safety, adaptability, and meaningful work outcomes.

Sustainability as a core principle

Environmental impact, resource use, and waste reduction are built into production decisions, not treated as after-the-fact constraints.

Resilience as a primary priority

Systems are designed to absorb disruption, adjust to change, and recover quickly – prioritizing continuity and stability alongside performance.

Flexible, collaborative workflows

Work is organized to support variation, customization, and learning, combining smart automation with human insight rather than rigid execution models.

Loading component...

What are the core differences between Industry 4.0 and Industry 5.0?

The table below highlights how the subtle difference in focus from entirely technology-led transformation to a more balanced model – using largely the same technologies, but centered on people, sustainability, and long-term resilience.

Dimension	Industry 4.0	Industry 5.0
Core focus	Digitizing and automating operations using connected technologies	Supporting people, sustainability, and resilience alongside digital innovation
Primary goal	Efficiency, speed, scale, and data-driven optimization	Human value, environmental responsibility, adaptability, and well-being
Role of people	People monitor, oversee, or intervene when automation needs help	People collaborate with intelligent tools, using creative judgment and expertise
Role of technology	IoT, automation, analytics, and cyber-physical systems drive transformation	Technology augments human strengths and supports sustainable, purpose-led operations
Production model	Highly automated, flexible, and responsive to real-time data	Flexible, personalized, and aligned with ethical, social, and ecological priorities
Sustainability	Important but often secondary to productivity and efficiency	Central pillar – reduced waste, responsible use of resources, circularity
Resilience	Enabled through automation and real-time monitoring	Enabled through human adaptability, collaborative systems, and environmental stability
Customization	Achieved through automation and flexible production lines	Enhanced through human-technology collaboration, enabling mass personalization
Organizational mindset	“Smarter, faster, more connected”	“Smarter, more human, more sustainable”

Loading component...

Benefits of incorporating Industry 5.0 concepts alongside Industry 4.0 technologies

Industry 4.0 gives manufacturers speed, connectivity, and visibility. And Industry 5.0 adds intention. When the two are used together, digital capability becomes a way to do more than optimize machines – it helps you augment your smart factory with smarter workflows and more engaged teams.

More resilient operations under disruption

Human-centered decision support, combined with real-time data, helps you respond quickly and meaningfully when conditions change – rather than relying solely on automated rules that may break under stress.

Stronger workforce engagement and retention

When technology is used to reduce cognitive load, improve safety, and support judgment, your teams can spend less time reacting and more time applying expertise. This supports both business outcomes and employee retention.

Sustainability embedded into daily decisions

Instead of treating sustainability as a reporting exercise, Industry 5.0 principles encourage your people to use data-driven digital insights to reduce waste, energy use, and unnecessary production as part of everyday operations.

Better alignment between operational efficiency and customer value

Industry 5.0 shifts the conversation from “maximum throughput” to “right outcomes,” supporting customization, service reliability, and ethical production – while still leveraging the power of AI and analytics to improve efficiency.

Long-term adaptability, not just short-term optimization

By balancing automation with human oversight, you can avoid brittle systems that perform well only under ideal conditions – and instead build operations that can evolve as markets, regulations, and expectations change.

Loading component...

Comparing Industry 4.0 and 5.0 technology usage in smart manufacturing

Again, from a purely technological point of view, 4.0 and 5.0 both use very similar tools and systems. A full understanding of this lies less in differentiating the technologies themselves than in the intentions behind their usage. The table below shows how these tools contribute to each era, followed by a short explanation of how they work together in modern smart manufacturing environments.

Technology area	Industry 4.0	Industry 5.0
Connectivity and IIoT	Core foundation: machines and sensors share real-time data across the factory	Expanded to support human workflows, safety, ergonomics, and collaboration
Automation and robotics	Automated cells, repetitive task automation, robotic handling	Collaborative robots (cobots) assist workers, enhancing precision and safety
Cloud computing	Centralizes data and integrates OT + IT systems across the enterprise	Supports distributed teams, sustainability tracking, and resilience planning
AI and machine learning	Predictive insights, anomaly detection, automated optimization	Human-centric AI that guides, assists, and augments operator decision-making
Big data and advanced analytics	Performance monitoring, predictive maintenance, process optimization	Used for broader goals such as waste reduction, energy efficiency, and scenario resilience
Digital twins and simulation	Virtual models of machines and processes optimize throughput and scheduling	Expanded to evaluate sustainability impacts, worker interactions, and long-term system health
Systems integration	OT-IT integration connects machines, MES, ERP, planning, and quality systems	Integration broadens to include workforce tools, collaboration layers, and environmental monitoring
Cybersecurity	Protects connected devices, data flows, and industrial systems	Adds focus on safeguarding human-machine collaboration and ethical data usage
Emerging tech (AR/MR, additive manufacturing)	AR for instructions; additive manufacturing for prototyping and flexible production	AR/MR for human guidance and real-time collaboration; additive used to reduce waste and support circularity

Loading component...

Agentic AI and the evolution of Industry 5.0 factories

For today’s manufacturers, AI is starting to look less like a passive “advisor” and more like a supervised digital teammate – able to take initiative, make decisions, and carry out responses on a person’s behalf. This shift includes agentic AI : systems that can pursue approved goals, plan, and act with a degree of autonomy, rather than simply generating insights and waiting for someone to execute the next step.

In the context of Industry 5.0, this matters because many “human-centric” outcomes depend on what happens between decisions – triaging signals, coordinating handoffs, checking constraints, and proactively moving work forward. Agentic AI can help by continuously assessing conditions, automating routine responses, and escalating the right issues to the right people with context. And this means that people can spend less time supervising every micro-step and more time applying those uniquely human skills of judgment and experience where it truly counts. You could say that agentic AI supports collaboration between people and intelligent tools by reducing complexity rather than adding to it. Instead of leaving value trapped in dashboards or pilot projects, it helps manufacturers turn AI into practical action that delivers visible, measurable results – faster than ever.

Loading component...

Challenges and tips for implementing Industry 5.0 principles and methods

Industry 5.0 is the next step in not just using new, AI-powered technologies but thinking about how their use is applied, measured, and experienced across the organization. While the principles of Industry 5.0 are widely understood, putting them into practice introduces a distinct set of challenges – particularly around how people interact with technology, how success is defined, and how change is sustained over time. Organizations often struggle to translate high-level ideas into everyday operations in ways that teams trust and leaders can clearly evaluate. The challenges below highlight where this transition most commonly breaks down, along with practical considerations for applying Industry 5.0 methods in ways that deliver visible value and lasting impact.

Shifting from automation-first thinking to people-first design

Technological evolution involves engaging people, not replacing them. Today, it’s important to reframe technology as support for judgment, safety, and collaboration, making human expertise a design priority. Results improve when operators and supervisors shape requirements early, using tools that reflect real work instead of forcing new routines that slow adoption and delay value.

Balancing efficiency metrics with broader value goals

KPIs focused only on utilization or cost can conflict with quality, sustainability, service reliability, or the ongoing wellbeing of your workforce. Rather than abandoning performance discipline, now is the time to broaden it so success is visible to leadership and frontline teams. Define a small set of business-relevant metrics, track them consistently, and use that evidence to scale what works. Technologies aligned to industry processes and data make it easier to prove results early and expand successful use cases.

Integrating sustainability without slowing operations

Sustainability goals can feel disruptive when disconnected from daily decisions. Embedding environmental indicators into operational data – such as materials, energy, scrap, rework, transport, and scheduling – can help your teams to act without added friction. Progress accelerates with AI-powered solutions and tools that can help you identify and prioritize the processes most relevant to your industry, thus making sustainability part of production decisions rather than a reporting layer added after the fact.

Managing change fatigue among experienced teams

After years of transformation initiatives, employees may be skeptical, especially if earlier efforts caused disruption without delivering visible gains. Resistance eases when organizations clearly explain what is changing, what is not, and how success will be measured. Practical support also matters and includes things like hands-on training, clear leadership and backing, and access to experienced external specialists. This helps reduce risk, shorten learning curves, and keep progress focused on improvements people can actually see in their daily work.

Avoiding over-engineering human-centric ideas

Be cautious how you implement your shift to more “human-centric” operations lest it risk sounding (and being) more abstract than practical. Keep improvements grounded in real work, safety outcomes, and a clear rationale. Leverage AI and smart solutions to help you prioritize changes that can be implemented, measured, and sustained. Practical progress builds confidence, reduces pushback, and supports thoughtful expansion over time.

Loading component...

Conclusion

In vintage sci-fi movies, our vision of futuristic technology often came in the form of labor-saving devices – humanoid robots that would do our chores and handle all our mundane tasks. Back in the 60s, we could never have envisioned that the most astonishing technological advancements would actually be invisible. They would come in the form of artificial intelligence and machine learning – and that their true strength would not be in replacing humans but in augmenting their irreplaceable human skills and ideas with tools that accelerate and enhance those abilities. As you build on your digital manufacturing foundations, understanding both the 4.0 and 5.0 concepts together helps you make choices that strengthen your day-to-day operations and set the stage for whatever comes next.

See how Infor’s AI-powered manufacturing solutions can help you leverage Industry 4.0 and 5.0 – and run more efficient, responsive, and safer operations.

Industrial manufacturing software

Loading component...

What is Industry 4.0 vs. Industry 5.0?